The Non Ruger 10-22, that is.
 |
| (as always, click pic to embigginfy) |
 |
| ain't it purty? |
Tactical Innovations receiver (red) (w/Black Bolt).
Kidd 2 stage trigger (12 oz/12/oz.) (You need one of these for your 10-22)......Very pricey. Very. But OMG! so very sweet.
Red/White/Blue because ...'Merica! And I felt like it. Colors ain't gonna make it shoot any better, I know, but since I was building it.......and it didn't cost more or anything...
The assembly will live, for now at least, in a surplus to needs Hogue stock that I had laying around (until I find a decent adjustable stock). I trimmed the stock to free float the barrel. You can pass a bill all the way to the Vee block.
And it will wear, for now at least, a 4-12 x 50 Tasco that I also had laying around. There will be an upgrade in the future, but I'm gonna have to save my pennies for a while to find the right glass for this rifle. (and there isn't anything wrong with the Tasco....it is a decent scope that has served me well in the past.....it is likely older than some of my readers)
This assembly was not entirely drop in. There were issues with tolerance stacking, but I have to say that Tactical Innovations went out of their way to help. So did Whistle Pig. (Kidd was just sure that their trigger wasn't at fault and blamed everyone else.....) I had light strikes on the rims resulting in unreliable ignition, which turned out to be a bit of tolerance stacking. But once that was solved (with help from Tactical Innovations who went out of their way to make things work for me) everything else went smoothly.
The receiver is a well machined piece of metal.
The barrel is a work of art.Very light too. I chose not to get one with a threaded end for a silencer, because that combination of color and flutes and threaded end wasn't stock....but Whistle Pig did say they would make one for me for a reasonable price....
The trigger is great. Not cheap, Expensive, in fact... but worth the cost...
Total weight is 5.6 lbs...but 2 lbs of that is the Hogue stock.
This weekend is busy, but I should get it to the range soon .
Range report to follow...
Other parts I used:
Kidd Vee block (and screws), Nicely machined piece. Much higher quality than others I have seen.
Kidd polished trigger pins. (these fit perfectly. If you warm them up in your hand, they won't go in.)
Kidd bolt handle/return spring. (IMO the best on the market).
American National Firearms bolt buffer. These never seem to wear out. I have one in a rifle that has over 23,000 rounds through it and there is zero appreciable wear on either the pin OR the bolt.
Now if I could only find decent aftermarket mags, then I can have an entirely Non Ruger 10-22.
I think I will call it Captain America
(And I paid for everything, so the FTC can go eat a large block of cheese)
6 comments:
I look forward to your range report. I like the idea of the colors but the all white stock first made me think back to the high school drill team's "rifles" :-)
Purty! :-) And you won't lose that one in a field of grass... :-) Interesting that Kidd was less than helpful!
Nicely done Sir! I really dig the red white and blue theme. Ohhh you had to say aftermarket magz didn't you? Since it's a replacement receiver patterned after the 10/22 per TI, I think the best magazine you're going to find for it is the Ruger BX25's. All of the other magz I've tried have really bad feed lips that break or bend. That's what I've come up with through my usage anyways...
That is nice! Be sure to let us know how it shoots, and I'd bet with that attention to detail it shoots as nice as it looks.
Very nice. I should have had you come by the house Tuesday to look at the other stock. Didn't think till now.
Very nice Mr. B! You are going to have a ton of fun with that!
Post a Comment